Oilfield Cementing Hydraulic Liner Hanger Used for Oilwell Completion Tool with Top Packer

• Customization: Available
• After-sales Service: yes
• Warranty: 1 year
• Model NO.: Line hanger
• Certification: CE, RoHS, ISO 9001:2000, ISO 9001:2008
• Surface Treatment: Spray-Paint
• Centralizer Type: Rigid
• Structure: Slider
• Material: Stainless Steel
• Type: Hanger
• Standard: API 11D1 V3
• Applications: Directional well, highly deviated well and horizon
• Packer type: Hydraulic-set retrievable packer
• Temperature rating: 60ºC~200ºC
• Suitable casing: 9-5/8" 40-47 ppf
• Transport Package: Wooden Case
• Specification: customized
• Trademark: STARSE
• Origin: Shanghai
• HS Code: 8431431000
• Production Capacity: 100000 Sets/Per Year

Product Description

Introduction

SSTP Retrievable Sealbore Packer is a Retrievable Packer. Hydraulically set by pressure in the tubing. It is run with Hydraulic Setting Tool & retrieving is done independently from the Tubing, using a Retrieving Tool manipulated on a work string. This packer is ideally suited for highly deviated well both onshore & offshore.

Features/Benefits

• The packer can be retrievable, tie-back, large circulation, rotated at large torque and reciprocated with large loads, which can deal with many complex conditions.
• Integral hydraulic setting capacity, and internally-configured barrier module prevents premature setting and hanging caused by circulating pressure.
• The special device of the packer ensures the packer will not set when encountering bump, friction, large torque rotation, large tonnage reciprocating and large circulation. It has high working performance and anti-risk ability to ensure safe running speed ≥30m/min.
• Maximum dogleg severity of packer through casing is greater than 20°/30m; The maximum dogleg severity is greater than 10°/30m and can be set at 100° or more.
• Clean up the well with large circulation. In field operations, the 9-5/8 "packer cleanup rate can reach about 6 BPM. High circulating pressure does not cause the packer to set without dropping the ball.

 

• Two packing elements are used with high-performance material. The special material of packing element with good sealing performance features in favorable resistance to acid, alkali, oil and high temperature, high pressure.
• There are special sealing and rubber cylinder protection mechanism on both sides of the rubber. The device has high strength and good ductility to fully protect the rubber cylinder and ensure high bearing capacity of the rubber cylinder.
• Hydraulically and mechanically releasing methods for service tools, and a tubing swivel head  installed in the inner string, making a small torque and ensuring reliable operation.
• High-strength premium material with high loading capacity.

• Working principle of top packer

Drop a setting ball and fill string with completion fluid, and hole pressure to shear out the corresponding pins in turn, and push the upper gauge ring to move. The movement of the upper gauge ring unlocks the special locking mechanism, and the rubber cylinder is squeezed and radial elastic deformation is generated to realize setting.
The rubber cylinder also has axial displacement in the radial expansion process. After the shear pin of the retainer ring is cut, the slip cage and the upper cone are pushed to move, while the lower cone has been fixed on the body, so the upper/lower cone will move towards each other, so as to activate the slip, extend the slip, and realize packer setting. After bleed-off in the string, the check ring prevents the component from retracting and remains set.

Service tool working principle
The top packer is run in the well with the sand-control string. The packer is set by dropping ball into the drill pipe to open the built-in shield module and push the piston. The packer is released by hydraulic or mechanical reverse release, and the packer service tool is retrieved after completion.
Retrieving principle

If the packer needs to be retrieved, run the special retrievable tool to enter the top packer. After in place, lift the retrievable tool to shear the pin of the support sleeve. Meanwhile, the elastic claw of the retrievable tool engages with the left-hand thread on the packer body to lift the drilling tool to retrieve the packer.

Size	9-5/8"
Suitable casing	9-5/8" 40-47ppf
Max. OD	8.450"
Sealing ID	6.000"
Total length	2m
Pressure rating	Pressure rating
Temperature rating	60ºC~200ºC
Packing element	HNBR
Setting method	Hydraulically
Release method	Through annular pressurization or mechanical rotation
Packer type	Hydraulic-set retrievable packer
Connection	5-1/2" 17lb/ft or 6-5/8" 24# BTC Pin Down
Applications	Directional well, highly deviated well and horizontal well, etc.
Standard	API 11D1 V3

Company Profile

Certifications

Customer visit

Exhibition

Packaging & Shipping

FAQ

Q1. How can I get samples of any product to confirm the quality?
A:1. Please provide us with your exact quantity. We can provide you with samples according to your specifications.
2. We can provide you with counter samples according to the samples you sent.

Q2. How can I get the price of the product?
A:1. Please send us your exact quantity. We can send you samples and pricing details back.
2. If you don't know any specifications. Please send us pictures of your products. We will give you an estimated price according to your pictures based on your needs. But the exact price must be given after we check your original samples.

Q3. I don't know the material or any other material information, how can I order from you.
A: It's the best way if you can send us samples so that we can provide you counter samples to check the quality. We will also quote you a price to verify the cost. After confirming all of these, you can contact our sales to place an order.

Q4. I am a small wholesaler, do you accept small orders?
A: If you are a small wholesaler, no problem, we are willing to grow with you.

Q5. Can you provide OEM or ODM service?
A: Yes. We can accept OEM services. Also, welcome to choose our ODM. Welcome to your inquiry!